Air
​Fleetguard® AF852M axial seal primary air filter ensures a proper seal and prevent leaks to prevent airborne contaminants from reaching the combustion chamber.

Specification
End 2 ID 12.73 inch
End 1 ID 8.40 inch
End 2 OD 12.73 inch
Length 23.00 inch
Largest OD 8.40 inch
Product Comments
Extended Life Version of AF852
Related Parts
Uses Service Part
3301159S
AF852M

Fuel, Primary Spin-On
Fleetguard® FF185 spin-on fuel filter delivers superior performance using proven media technology, removing harmful contaminants. Fleetguard fuel filters ensure optimal fuel system protection to meet or exceed OEM specifications.

Specification
Gasket Inside Diameter 2.46 inch
Length 6.94 inch
Seam OD 3.67 in
EFFICIENCY, TWA BY SAE J 1985 97%
Gasket OD 2.83 inch
Largest OD 3.68 inch
Standpipe NO
MICRON RATING BY SAE J 1985 8 micron

Fuel, Cartridge
Fleetguard® FF5045 fuel filter cartridge reduces contamination, trapping dirt particles and preventing them from reaching the moving parts in your engine supporting longer service intervals.

Specification
Length 3.30 inch

OEM Cross Reference
Cummins Onan: 149180
John Deere: AR86745-RE27091
Sdmo: 330361784-330560628
Stanadyne: 22072-22177-24336-26654-26663
Timberjack: 416257-841625700

Fuel, Cartridge
Fleetguard® FF5323 fuel filter cartridge reduces contamination, trapping dirt particles and preventing them from reaching the moving parts in your engine supporting longer service intervals.

Specification
End 2 ID 1.61 inch
End 2 OD 3.92 inch
Length 9.23 inch
MICRON RATING BY SAE J 1985 5 micron

Fuel, Cartridge
Fleetguard® FF167A fuel filter cartridge reduces contamination, trapping dirt particles and preventing them from reaching the moving parts in your engine supporting longer service intervals.

Specification
End 2 ID 0.67 inch
Largest OD 3.48 inch
Length 2.80 inch
MICRON RATING BY SAE J 1858 12 micron

Fuel, Spin-On
Fleetguard® FF211 spin-on fuel filter delivers superior performance using proven media technology, removing harmful contaminants. Fleetguard fuel filters ensure optimal fuel system protection to meet or exceed OEM specifications.

Specification
Gasket Inside Diameter 2.46 inch
Largest OD 4.24 inch
Seam OD 4.26 in
EFFICIENCY, TWA BY SAE J 1985 97%
Gasket OD 2.82 inch
Length 10.44 inch
Standpipe NO
MICRON RATING BY SAE J 1985 8 micron

Fuel, Spin-On
Fleetguard® FF231 spin-on fuel filter delivers superior performance using proven media technology, removing harmful contaminants. Fleetguard fuel filters ensure optimal fuel system protection to meet or exceed OEM specifications.

Specification
Gasket Inside Diameter 2.44 inch
Largest OD 3.68 inch
Seam OD 3.681 in
EFFICIENCY, TWA BY SAE J 1858 98%
Gasket OD 2.76 inch
Length 5.59 inch
Standpipe NO
MICRON RATING BY SAE J 1858 18 micron

Description
Primary air filter for Perkins engines 26510362 are designed to meet strict standards to provide the best value protection for your Perkins engine and normal duty diesel engine filtration applications to remove particulates. Fin diameter 130mm. You can't control the environment you're working in, but you can keep your engine working longer by keeping the air used for combustion clean. Removing particulates prevents wear to vital components such as injectors and turbochargers.

Details
External diameter (in) 4.2
External diameter (mm) 105.5
Length (in) 11.8
Length (mm) 299.5
Seal outer diameter (in) 2.4
Seal outer diameter (mm) 60.1

Compatibility
100 Series
103.10, 103.13, 103.15
1100 Series
1103A-33, 1103C-33, 1103D-33, 1103D-33G
3.152 Series
3.152, 3.1524, D3.152
400 Series
403C-11, 403C-15
900 Series
903-27

Description
Water pump T423548 is a simple centrifugal pump, pushing the fluid from the pump into the engine, often belt driven from the crankshaft to circulate coolant fluid whenever the engine is running. Common signs of wear include coolant leaks, overheating of the engine, the pulley is loose and making whining sounds, or worst case steam coming from the engine. Perkins water pumps undergo extensive testing to ensure coolant flow and pressures match the engine requirements, and are designed to meet the flow and pressures within the engine using high-quality ceramic cartridge seals and sealed bearings. Typically Perkins water pumps are supplied with gasket kits.

Compatibility
1100 Series
1104D-E44T, 1104D-E44TA, 1106A-70T, 1106A-70TA, 1106C-E70TA, 1106D-70TA, 1106D-E66TA, 1106D-E70TA

Details
Drive Gear
Inlet position Downwards
Outlet position Block side

Fuel, Spin-On
Fleetguard® FF5018 spin-on fuel filter delivers superior performance using proven media technology, removing harmful contaminants. Fleetguard fuel filters ensure optimal fuel system protection to meet or exceed OEM specifications.

Specification
Gasket Inside Diameter 2.44 inch
Length 4.92 inch
Seam OD 3.051 in
EFFICIENCY, TWA BY SAE J 1858 98%
Gasket OD 2.76 inch
Largest OD 3.05 inch
Standpipe YES
MICRON RATING BY SAE J 1858 18 micron

The DSE8610 MKII represents the latest in complex load sharing & synchronising control technology. Designed to handle the most complex grid type generator applications the DSE8610 MKII control module is packed with multiple features and benefits that are unrivalled across the generator control industry.

New Features Added May 2020. Read Product Change Notification Document for details.

OVERALL SIZE
245 mm x 184 mm x 51 mm (9.6″ x 7.2″ x 2.0″)

PANEL CUTOUT SIZE
220 mm x 160 mm (8.7″ x 6.3″)

MAXIMUM PANEL THICKNESS
8.0 mm (0.3″)

WEIGHT
0.88kg

PRODUCT VARIANTS
8610-02 – 8610 MKII Synchronising & Load Sharing Control Module (Ct, Rtc)

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries

MAXIMUM OPERATING CURRENT
460 mA at 12 V, 245 mA at 24 V

MAXIMUM STANDBY CURRENT
375 mA at 12 V, 200 mA at 24 V

CHARGE FAIL/EXCITATION RANGE
0 V to 35 V

OUTPUTS

OUTPUT A (FUEL)
15 A DC at supply voltage

OUTPUT B (START)
15 A DC at supply voltage

OUTPUTS C & D
8 A AC at 250 V AC (Volt free)

AUXILIARY OUTPUTS E,F,G,H,I & J
2 A DC at supply voltage

GENERATOR & BUS

VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
25 V to 719 V AC (Ph to Ph)

FREQUENCY RANGE
3.5 Hz to 75 Hz

MAGNETIC PICK-UP
VOLTAGE RANGE
+/- 0.5 V to 70 V

FREQUENCY RANGE
10,000 Hz (max)

BUILT-IN GOVERNOR CONTROL

MINIMUM LOAD IMPEDANCE
1000Ω
Fully isolated

GAIN VOLTAGE
0 V to 10 V DC
Fully isolated

OFFSET VOLTAGE
+/- 10 V DC
Fully isolated

BUILT-IN AVR CONTROL

MINIMUM LOAD IMPEDANCE
1000Ω
Fully isolated

GAIN VOLTAGE
0 V to 10 V DC
Fully isolated

OFFSET VOLTAGE
+/- 10 V DC
Fully isolated

DSE9702
Vertical 12 volt 5 amp Battery Charger
The DSE9702 12 volt 5 amp switch-mode battery charger keeps batteries charged to their maximum capacity at all times. It is designed for permanent battery connection and can be DIN rail or chassis mounted. The charger includes a normal or overload condition LED indicator on the front to assist with status identification. The charger operates during cranking and running and accepts multiple AC voltage connections.

الوصف

جزء الاسم: منظم جهد كهربائي أوتوماتيكي
رقم الجزء: VR6 365-2076
تطبيق ل كاتربيلر CAT المحرك 3306B 3406C 3456 C15 C9
1.AVR K65-12B ، AVR VR6 هو تصميمنا الجديد خصيصا للمولد.
المواصفات:
انتاج الطاقة (مع إدخال 240 Vac): 12 Adc @ 65 Vdc أقصى استمرار. 25 Adc @ 125 Vdc إجبار لمدة 10 ثانية.
التيار المتناوب مدخلات الطاقة: 100 إلى 280 Vac ، مرحلة واحدة 50 إلى 400Hz ، أو 63 إلى 105 Vac ؛ threephase ، 50 إلى 400Hz ، 1092 VA أقصى عبء مستمر التيار المتناوب الاستشعار الجهد: 90 إلى 140 Vac ، 50/60Hz ؛ مرحلة واحدة أو ثلاث مراحل.
الجهد الخارجي ضبط ريوستات: 10k أوم ، 2 واط ، الجهد تنظيم دقة: ± 0.5% متوسط الاستجابة الجهد الانجراف: ± 1% فرق الجهد ل 40 درجة مئوية (104 درجة فهرنهايت) تغيير;

SKU: T432954-PK
Perkins Electronic Diesel Pump Governor *
*This Unit will need programming to your specific engine
We will be happy to program this unit for a small fee

Engine Compatibility:
1103A-33 - DJ
1103A-33T - DK
1103C-33 - DC
1103C-33T - DD
1103D-33 - XK
1104A-44 - RR
1104A-44T - RS
1104C-44 - RE
1104C-44T - RG
1104C-44TA - RJ
1104D-44T - NL
1106A-70TA - PR

Details
Part number:
Perkins 9521A300T T405573
Caterpillar CA3486930 348-6930 3486930
Delphi DP310

Application:
For Perkins Engine:1106A-70TA
For Caterpillar DE200E0 Generator Set NMD00001-UP POWERED BY C7.1 Engine
For Caterpillar C7.1 DE200E0/DE220E0/DE150E0 Generator Set GTP00001-UP
For Caterpillar C7.1 DE200E0/DE220E0 Generator Set ECW00001-UP

Replacement fuel pump solenoid 26420469 to control Perkins fuel pumps, designed to shut off the fuel system in the event of a failure.

Description:
Oil pressure sensors T421762 within the engine can be used to provide a visible warning to the operator when oil levels are low and are designed to assist in engine control. Without the proper amount of oil, your engine will sustain major damage. Calibrated to the oil pressure the engine requires for effective oil circulation.

Compatibility
400 Series
403A-15, 403D-07, 403D-15, 403D-15T, 403D-17, 403F-15, 404A-22, 404D-22, 404D-22T, 404D-22TA, 404F-22

Description
T401573 KRP3024 Perkins Piston Kit for 2000/3000 series engine parts/Perkins Droman/FG Wilson generator parts

Suitable for engines: 2206D-E13TA(PK3S), 2206TAG2(TGBF), 2206TAG3(TGDF), 2206TAG5(TGFF)

Description
Piston rings seal the combustion chamber. They are set with precision so as to apply the correct pressure on the cylinder wall or liner, which ensures there is a consistent film of oil across the cylinder's working surfaces. This provides sufficient lubrication and protects against wear.

Piston rings from Perkins come as three rings. They are the top compression ring, then the intermediate compression ring and finally the oil control ring. These parts are relatively small in size but play a large role in the main cylinder block of your engine.

DESCRIPTION
Perkins T402871 CYLINDER LINER
The aftermarket Perkins T402871 Cylinder Liner, performs as well or exceeds the performance of OEM parts while keeping affordable pricing.
Product Name Perkins T402871 CYLINDER LINER
Brand PERKINS
Weight 12.00 POUNDS